Commercial and Grease
Get in Touch
Resources
All services
Forty-three service pages, grouped by what the job actually is rather than by which part of the system it touches. Every one is quoted in writing, with disposal shown as its own line.
Where to start
If something is backing up right now, start with septic tank pumping: an overdue tank is the single most common cause and the cheapest to rule out. If the tank was pumped recently and the problem came back within weeks, the issue is downstream and belongs on the drain field page.
If you are buying, selling or refinancing, you need a documented septic inspection rather than a service call. If the system is old, undersized or has failed outright, installation and replacement covers the soil test, design and permit work that has to happen before anyone digs.
And if you just want the number before you call, the cost guide sets out ranges for every job on this page.
Pumping
Routine, emergency and commercial pump-outs, plus lift stations.
Routine pumping with sludge and scum depths measured before and after.
Learn moreBackflushing and wall cleaning when pumping alone leaves compacted solids behind.
Learn moreSame-day and overnight pumping when sewage is backing up into the house.
Learn moreScheduled routes for multi-tank and high-volume systems, with manifests.
Learn moreWet well pump-outs, float checks and alarm testing on pressurised systems.
Learn more24/7 callouts for backups, alarms and effluent surfacing in the yard.
Learn moreInspections
From an annual check to the certification a lender will accept.
Yearly check of levels, baffles, filter and field with a written report.
Learn morePre-purchase inspection with the tank pumped so the interior can be seen.
Learn moreScope runs through the line to find roots, bellies, breaks and blockages.
Learn moreTraced dye to confirm whether effluent is surfacing or leaving the property.
Learn moreThe signed document lenders, insurers and municipalities ask for at closing.
Learn moreInstallation
Soil evaluation, design, permits and the install itself.
Full builds from soil evaluation through permit, install and final grading.
Learn moreSwapping a cracked, collapsed or undersized tank while keeping a sound field.
Learn moreTank and field together when the existing system has reached the end.
Learn moreTest pits and percolation rates that decide what the site can actually take.
Learn moreSizing, drawings and the permit application filed on your behalf.
Learn moreATU installs for tight lots and poor soil where a conventional bed will not fit.
Learn moreRepair
The components that fail first, and what each one costs to put right.
Cracks, leaking seams, damaged lids and inlet or outlet work on the tank itself.
Learn moreThe part that keeps scum out of your field, and the cheapest one to replace.
Learn moreRelevelling or replacing the D-box so every trench takes its share again.
Learn moreEffluent pumps, float switches and alarm panels on pressurised systems.
Learn moreBringing buried lids to grade so future visits stop costing a dig.
Learn moreClearing the inlet line, outlet tee or field line that is holding water back.
Learn moreDrain field
Diagnosis, rejuvenation, partial repair and full replacement.
Targeted trench and header repairs when only part of the bed has failed.
Learn moreA new bed when the soil interface is sealed and no longer accepts effluent.
Learn moreJetting and aeration that can buy time on a field that is slow but not dead.
Learn moreFull leach field rebuilds, including the design and permit work that comes first.
Learn moreWhat surfacing water, lush grass and sewage odour actually mean, and what each costs.
Learn moreMaintenance
Scheduled work that keeps a system inside its design and its permit.
Working out your real interval from measured depths and household size.
Learn moreThe annual clean that prevents the most common cause of a sudden backup.
Learn moreBlower, diffuser and chlorine checks that keep an ATU inside its permit.
Learn moreScheduled visits with records kept, for owners and property managers.
Learn moreFull scrape-out and wall cleaning, not a skim, with the manifest left on site.
Learn moreScheduled pump-outs sized to your covers and your grease load.
Learn moreKeeping the logs and manifests an inspector asks to see on a kitchen visit.
Learn moreCommercial and cost
Routes, manifests and the price ranges behind every job above.
Kitchens, traps and tanks on one schedule, booked outside service hours.
Learn moreMulti-site routes with one point of contact and records kept per address.
Learn morePump, float, panel and alarm servicing on a schedule that avoids overflows.
Learn moreWhat a pump-out costs, and which four things move the number.
Learn moreFull replacement pricing from soil test through permit, install and grading.
Learn moreAnnual, real estate and camera inspection pricing, and what each includes.
Learn moreThe single biggest septic bill, broken down by the parts you can control.
Learn morePer-visit pricing by trap size, and why frequency changes the annual total.
Learn moreCommon questions
Choosing between the groups above.
Pumping, inspection, a d-box repair and risers, all from one company over two years. Every job had a written record.
They do the grease trap and the septic tank at our restaurant, so nobody blames the other contractor when something goes wrong.
From the perc test to the final inspection on a new system, one crew and one contact. That made a stressful build simple.
Whatever the job, it starts with opening the lid and measuring. That habit is why we trust their quotes.
Next step
Describe the symptom or name the job. You get a measured diagnosis and a written price before anything starts.
Written quotes · Disposal receipt included · 24/7 emergency callouts